|
Post by Ez on Sept 10, 2010 19:22:28 GMT -5
|
|
|
Post by SSAfam1 on Sept 10, 2010 20:24:38 GMT -5
I like this. I can totally see this being a belt over black slacks.
|
|
|
Post by Ez on Sept 10, 2010 20:43:03 GMT -5
thank you
|
|
|
Post by SSAfam1 on Sept 10, 2010 20:49:04 GMT -5
thank you OH my that's so cute~
|
|
trixe
New Member
Always Look On The Bright Side Of Life
Posts: 95
|
Post by trixe on Sept 12, 2010 17:40:27 GMT -5
Hi ez lovely tut for the chain I have a couple of issues first one is I work on a laptop and when I come to the part to select the 2 chain links by shift and numberlock+ they will not select the faces. Sec issue is when I use the copy and support tool when I apply and use the setting you use im getting long dangly chain links.Hugs Trixe
|
|
|
Post by Ez on Sept 12, 2010 18:33:58 GMT -5
Hi ez lovely tut for the chain I have a couple of issues first one is I work on a laptop and when I come to the part to select the 2 chain links by shift and numberlock+ they will not select the faces. Sec issue is when I use the copy and support tool when I apply and use the setting you use im getting long dangly chain links.Hugs Trixe reboot your computer and try again, the first part make sure the faces are select First and make sure your holding the shift key down and keep it held down then over on the num pad press the + sign and keep it held down( not the + sign up by the backspace key). the second part can you post a pic so i can see? it sounds like you need to adjust the scale size of the links, when your in copy on support use the scale option in the properties on the upper far right. just test it with your poly line with just a very few points to see what happens because to many could cause it to delay and your not seeing it update.
|
|
trixe
New Member
Always Look On The Bright Side Of Life
Posts: 95
|
Post by trixe on Sept 12, 2010 18:54:08 GMT -5
Thank you for the screenshot trying to grab a pic from hex but its frozen up and it's time I was in sleep lol england time I will try again tomorrow for a pic for you Thank you so much for your help Hugs Trixe
|
|
trixe
New Member
Always Look On The Bright Side Of Life
Posts: 95
|
Post by trixe on Sept 12, 2010 19:25:36 GMT -5
Hi Ez here the screen shot think I've done something wrong hun be bak to moz going to bed now. Hugs Trixe Attachments:
|
|
|
Post by Ez on Sept 12, 2010 20:31:17 GMT -5
oopsy it looks like you copyed on supported the long chain AND the 2 links,, look in the scene tree on the far middle right,
you can right click and ungroup them then make sure your 2 links are welded THEN copy on support the 2 links only and not the long chain.
did you get the SHIFT key to work?
|
|
trixe
New Member
Always Look On The Bright Side Of Life
Posts: 95
|
Post by trixe on Sept 13, 2010 7:35:49 GMT -5
Hi Ez yes I got the shift to work and it highlighted the faces now have to work on the other issue today. Will let you know how I get on. Thank you so much for helping Hugs Trixe
|
|
trixe
New Member
Always Look On The Bright Side Of Life
Posts: 95
|
Post by trixe on Sept 13, 2010 8:17:41 GMT -5
|
|
|
Post by Ez on Sept 13, 2010 17:13:40 GMT -5
lol see not to hard ;D
|
|