|
Post by SSAfam1 on Sept 20, 2010 8:23:37 GMT -5
|
|
|
Post by roxannej on Sept 20, 2010 8:56:48 GMT -5
Here are the steps to do it in D|S: 1. Create your shirt normally, but be sure the pieces you want to morph are separate pieces. (When I created the shirt, I made a left and right button facing. The front was in 2 pieces.) 2, Group the shirt properly. 3. Create your CR2 with the shirt. 4. Bring the grouped shirt back into Hexagon and create your morph. Remember that you cannot delete or add polygons - only move them. If your morph spawns 2 groups, be certain to highlight/select them together. 5. Save the morph file and export the OBJ to a new filename in the same runtime as the shirt. 6. Open D|S, load the shirt through your CR2. Make sure the shirt is selected in the scene tab. 7. Choose Edit>MorphLoader and, following the on screen prompts, import your morph. Your morph will appear on the Parameters Tab. 8. Export the CR2. Attachments:
|
|
|
Post by roxannej on Sept 20, 2010 9:02:45 GMT -5
Shirt Closed. Attachments:
|
|
|
Post by roxannej on Sept 20, 2010 9:03:10 GMT -5
Shirt Opened. Attachments:
|
|
|
Post by SSAfam1 on Sept 20, 2010 9:34:39 GMT -5
Excellent!
|
|
|
Post by roxannej on Sept 20, 2010 9:47:35 GMT -5
One thing I noticed, be sure to set your min and max on the morph. The "close" portion went beyond the original and overlapped, so I set the min appropriately.
|
|
|
Post by SSAfam1 on Sept 20, 2010 9:59:38 GMT -5
One thing I noticed, be sure to set your min and max on the morph. The "close" portion went beyond the original and overlapped, so I set the min appropriately. What did you set both to? Or will they be different for different clothing?
|
|
|
Post by roxannej on Sept 20, 2010 10:10:38 GMT -5
One thing I noticed, be sure to set your min and max on the morph. The "close" portion went beyond the original and overlapped, so I set the min appropriately. What did you set both to? Or will they be different for different clothing? They will be different depending on the clothing item AND the figure. The setting only pertains to how much you want the morph to move in either direction. If I left it to the default, the button facings overlapped each other on the MIN side.
|
|
while
New Member
Posts: 10
|
Post by while on Feb 20, 2012 21:54:55 GMT -5
I set the min appropriately.
|
|